Start With the Grade
Stainless steel tube resists corrosion because of the chromium in its chemistry, but not all stainless is equal. The two grades buyers request most are 304 and 316L, and the difference between them decides whether a project passes inspection or fails in service.




304 vs 316L — What Changes
| Property | 304 / 304L | 316L |
|---|---|---|
| Chemistry | 18% Cr, 8% Ni | 16% Cr, 10% Ni + 2% Mo |
| Corrosion resistance | Good | Excellent (chlorides, acids) |
| Best for | General, food, water, architectural | Chemical, marine, pharma, oil & gas |
| Cost | Lower | Higher |
The molybdenum in 316L is what lifts its resistance to chlorides, acids and salt water. Where a 304 tube may pit in a coastal or chemical environment, 316L holds up far longer. The "L" grade also has lower carbon, which improves weldability and reduces the risk of corrosion at welded joints.
Seamless vs Welded Tube
- Seamless: formed from a solid billet with no weld seam — higher pressure rating and preferred for oil & gas, high-temperature and critical service.
- Welded: lower cost and available in thin walls and long lengths — ideal for architectural, sanitary and general fabrication.

Which Project Needs Which
- Food, dairy and pharmaceutical — 304 or 316L sanitary tube with polished finish.
- Chemical and petrochemical — 316L seamless tube.
- Oil & gas and high pressure — duplex 2205 or 316L seamless.
- Architectural and decorative — 304 welded rectangular or square tube.
- Precision instrumentation — 304 capillary tube.
Wall Thickness, Tolerance and Finish
Wall thickness drives both the pressure rating and the weight of a stainless tube, so it must be specified precisely. For hygienic service the internal and external surfaces are usually polished to a defined Ra value to prevent bacterial build-up, while architectural tube may require a 600-grit or mirror polish. Always confirm the tolerance on outside diameter and wall thickness, and request hydrostatic or eddy-current testing for critical lines.
Sourcing Checklist
- Confirm grade (304, 316L or duplex 2205) and standard (ASTM A213 / A269 / A554).
- State seamless or welded, and the pressure requirement.
- Fix OD, wall thickness and length tolerance.
- Specify surface finish (mill, polished, Ra value) and testing (hydro, eddy current).
- Request an EN 10204 3.1 mill certificate with each lot.
Why Buy Stainless Tube from SYLAITH
WUXI SYLAITH SPECIAL STEEL CO., LIMITED (brand SYLAITH) supplies 304, 316L and duplex 2205 stainless steel tube in seamless and welded form, sized to your project. With documented quality and reliable export service, we support chemical, food, marine and energy buyers worldwide.
Request a Quote
Send your grade, dimensions and standard to sales2@slssteel.com for a specification review and quotation within one working day.