Brass or Bronze? Start With Composition
Brass and bronze are both copper alloys, and buyers frequently ask which one to specify. The difference comes down to the main alloying element. Brass is copper alloyed primarily with zinc; bronze is copper alloyed primarily with tin (or, in modern usage, aluminium, silicon or nickel). That single distinction drives strength, corrosion resistance and machinability — and therefore the right choice for your part.




Quick Comparison
| Property | Brass | Bronze |
|---|---|---|
| Main alloy | Zinc | Tin / Aluminium / Nickel |
| Colour | Yellow to golden | Reddish to brown |
| Strength | Moderate | Higher |
| Corrosion resistance | Good (dezincification risk in seawater) | Excellent (marine grade) |
| Machinability | Excellent | Good |
| Typical use | Fittings, valves, decoration | Bearings, pumps, marine parts |
Common Brass Grades
Brass sheet and bar are usually supplied in the C26000 (cartridge brass), C2680 and C28000 families. These grades combine excellent machinability with good corrosion resistance and a warm golden colour, which is why they are widely used for architectural trim, sanitary fittings, electrical components and decorative panels. For marine or high-stress parts, C83600 (leaded gunmetal) and other tin bronzes offer far better durability.

When to Choose Bronze
- Seawater and marine environments — bronze resists corrosion far better than brass.
- Bearings, bushings and worm gears — bronze offers low friction and high load capacity.
- Pumps, valves and impellers exposed to cavitation.
- High-strength, wear-resistant industrial components.
When to Choose Brass
- High-volume machining — brass chips break cleanly and tool life is long.
- Decorative and architectural surfaces where a golden finish is desired.
- Electrical connectors that need good conductivity plus strength.
- Plumbing and sanitary components with a bright, corrosion-resistant finish.
Specification Checklist
- Confirm alloy grade (for example C2680 brass or C83600 bronze).
- State temper and mechanical properties required.
- Fix thickness / diameter tolerance and surface finish.
- Request a chemical composition and mill certificate with each lot.
Supply Forms and Surface Finish
Brass and bronze are available as sheet, plate, rod, bar, strip and tube. Surface finishes range from mill and brushed to polished and gold-coloured plated for decorative use. Specify the finish and supply form together with the alloy grade, because the same grade can behave differently depending on how it is rolled, drawn or annealed. When in doubt, ask your supplier for a sample and a mill certificate before committing to a full production order.
Why Buy Copper Alloy from SYLAITH
WUXI SYLAITH SPECIAL STEEL CO., LIMITED (brand SYLAITH) manufactures and exports brass and bronze sheet, plate, rod and bar in the grades above, plus pure copper products. With stable quality, competitive prices and reliable export service, we help industrial buyers secure consistent copper alloys that meet their drawings and their customers' standards.
Request a Quote
Send your alloy grade, dimensions and quantity to sales2@slssteel.com for a specification review, MOQ, lead time and price basis within one working day.