ASTM B152 C11000 Copper Plate and Copper Sheet in 4x8 ft Standard Size with 1-10mm Thickness
Product Details
| Material: | C11000 ETP Copper, Cu >= 99.90% | Standard: | ASTM B152 |
|---|---|---|---|
| Thickness: | 1-10 Mm | Sheet Size: | 1220 X 2440 Mm (4 X 8 Ft) |
| Temper: | O / 1/2 Hard | Surface: | Mill / Bright / Polished |
| Packing: | Film Protected, Palletised | Application: | Distribution, Roofing, Signage |
| Highlight |
4x8 copper plate sheet,standard size copper plate,distributor copper plate stock |
||
Product Description
Standard 1220 x 2440 mm (4 x 8 ft) C11000 plate in the thicknesses distributors sell most: 1 mm, 2 mm, 3 mm, 5 mm and 10 mm. Supplied flat, film protected and palletised for warehouse handling, so the sheet arrives saleable rather than requiring re-flattening or re-packing.
- Material: C11000 electrolytic tough pitch copper, Cu ≥ 99.90%
- Supply form: rolled plate and sheet, cut to size on request
- Capacity: 1000+ tons per month from our Wuxi plant, with plate stock held for urgent orders
- Typical users: metal distributors, roofing contractors, signage and fabrication workshops
| Parameter | Details |
|---|---|
| Material | C11000 (ETP copper, Cu ≥ 99.90%) |
| Standard | ASTM B152 (also produced to JIS H3100, EN 13601, GB/T 2040 on request) |
| Thickness | 1 mm – 10 mm (stock 1 / 2 / 3 / 5 / 10 mm) |
| Width | 1220 mm (4 ft) standard, 1000–1500 mm on request |
| Length | Standard 1000 / 2000 / 2440 / 3000 mm, or customized |
| Temper | O / 1/2 Hard / Hard (H04, H02, H08 available) |
| Surface | Mill / Bright / Polished |
| Certificate | MTC with heat number and mechanical results, ISO 9001:2015 |
| Conductivity | ≥ 100% IACS |
| Dimensional tolerance | Thickness ± 0.05 mm, diagonal tolerance within 3 mm |
Plates are rolled from certified electrolytic cathode, then processed in-house so the customer receives installation-ready material instead of a mill plate that must be re-worked locally.
- Cutting and slitting: CNC plasma and water-jet cutting, guillotine shearing and slitting lines handle straight cuts, profiles, holes and narrow strips.
- Machining: sawing of heavy plate, edge milling, chamfering and deburring.
- Forming: bending, punching and welding of plate into busbar and panel assemblies on request.
- Surface processing: bright pickling, polishing and PE film protection for visible or decorative faces.
- Inspection at every step: incoming chemistry check, in-process thickness and width measurement, final flatness and visual inspection before packing.
Standard sheet sizes reduce cutting waste and simplify stock keeping. Each pallet is strapped and labelled by thickness for fast warehouse picking.
| Industry | Typical part | Why C11000 |
|---|---|---|
| Distribution | Sheet stock for resale | Standard sizes, saleable packing |
| Roofing and gutter | Flashing, gutter sections, capping | Formability and weather resistance |
| Signage and decoration | Backing panels, lettering | Warm colour, polished option |
| General fabrication | Brackets, tanks, liners | Easy soldering and welding |
- Chemical composition: spectrometer analysis on every heat, reported on the MTC.
- Mechanical properties: tensile and elongation tested per batch to ASTM B152.
- Dimension and flatness: thickness gauge and straight-edge check on each bundle, recorded on the inspection sheet.
- Surface: 100% visual inspection under daylight lamps; protective PE film applied where required.
- Packing: interleaving paper between plates, anti-moisture film wrap, fumigated wooden pallet, steel strapping and corner protectors; container loading photos sent before departure.
- Real capacity: 1000+ tons per month with plate stock of 0.5 mm, 1 mm, 2 mm, 3 mm, 5 mm, 10 mm and 20 mm held in Wuxi.
- In-house processing: cutting, slitting, sawing and machining under one roof, so lead time is not lost to subcontractors.
- Honest lead times: 3–7 working days for stock sheets, 10–15 working days for mill programmes.
- Low entry quantity: MOQ 100 kg, so a buyer can verify quality on a trial pallet before committing tonnage.
- Traceable quality: MTC per heat, batch photos and third-party inspection on request.
- Export experience: 80%–90% of output is exported, with sea-freight packing proven on European, Middle East and Southeast Asian routes.
C11000 is electrolytic tough pitch (ETP) copper with roughly 0.02–0.05% oxygen and a minimum of 99.90% Cu. C10200 is oxygen-free copper with oxygen below 0.001% and 99.95% Cu minimum, so it resists hydrogen embrittlement during brazing in vacuum or reducing atmospheres. Choose C11000 for busbars, general fabrication and cost efficiency; choose C10200 for vacuum components, electron tubes and critical brazed assemblies.
ASTM B152 is the standard specification for copper sheet, strip, plate and rolled bar. It defines the required chemical composition, mechanical properties and dimensional tolerances for grades such as C11000, C10200 and C12200. Plates supplied to ASTM B152 are normally certified with a Mill Test Certificate stating heat number, chemistry and mechanical results.
Yes. We slit, shear, saw and CNC cut to your drawing. Standard tolerances are ± 0.1 mm on thickness for cut plate and ± 1 mm on width and length; tighter tolerance down to ± 0.05 mm is available on request. Cut pieces are deburred and individually labelled before packing.
Our C11000 plates run from 0.5 mm to 200 mm. Stock thicknesses are 0.5 mm, 1 mm, 2 mm, 3 mm, 5 mm, 10 mm and 20 mm; other thicknesses are rolled or sawn to order. Thickness tolerance follows ASTM B152 unless a tighter drawing tolerance is specified.
Yes. Every shipment is accompanied by an MTC showing heat number, chemical composition and mechanical properties, issued against the actual production batch. Third-party inspection such as SGS or BV and pre-shipment dimension reports can be arranged on request.
Send the following five points and you will receive a quotation with current LME-linked pricing within one working day:
| Item | What to tell us |
|---|---|
| 1. Material | C11000, or ask us to recommend C10200 / C12200 / brass grades |
| 2. Thickness | Required thickness and tolerance |
| 3. Size | Width x length, or drawing for cut profiles |
| 4. Quantity | Kilograms or tons per size, and whether trial order |
| 5. Destination port | Port of discharge so we can quote FOB, CFR or CIF |
Request a quote today: reply with your material, thickness, size, quantity and destination port, and our export team will confirm price, stock availability and the next sailing date.
Product Highlights
C11000 copper plate to ASTM B152 in standard 4x8 ft sheets, 1-10 mm, stock thicknesses, film protected and palletised for distributor resale.
Hot Rolled Plate C95410 Aluminum Bronze Sheet Brush Surface Decoration Industry
Hot Rolled Plate C95410 Aluminum Bronze Sheet High-quality C95410 Aluminum Bronze Copper Plates, hot rolled and precision-processed for industrial and decorative applications. With a minimum copper content of 99%, these plates offer exceptional strength, wear resistance, and corrosion resistance. ...
T2 Pure Copper Plates 3mm 5mm 20mm Thickness C11000 C10100 4 X 8ft
Pure Copper Plates T2 3mm 5mm 20mm Thickness | C11000 C10100 4x8 Copper Sheet Supplier Price Product Description: We supply high-purity 99.99% Copper Plates and Sheets (T2, C11000, C10100, C10200), available in popular thicknesses of 3mm, 5mm, 20mm, and custom dimensions including 4x8 ft sheets. ...
C19400 C11000 Red Copper Strip Coils 12mm Bronze For Welding Cutting C1100 Decorative
C19400 C11000 Red Copper Strip Coils 12mm Bronze For Welding Cutting C1100 Decorative Product Attributes Attribute Value Material Red copper Shape Strip Alloy Or Not Non-Alloy Cu (Min) 99.9% Samples Free to supply Processing Service Bending, Welding, Cutting Hardness 1/2 Hard/1/4Hard/ Hard ...
0.01mm Thickness Electrolytic Copper Foil Strip Custom Size Fast Shipping
0.01mm Thickness Electrolytic Copper Foil Strip Custom Size Fast Shipping Product Attributes Attribute Value Material Red copper Shape Strip Alloy Or Not Non-Alloy Cu (Min) 99.9% Samples Free to supply Processing Service Bending, Welding, Cutting Hardness 1/2 Hard/1/4Hard/ Hard Application ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
